H3C交换机配置WEB界面
把交换机恢复出厂设置：
在交换机启动的过程出现提示按CTRL+B的时候按下CTRL+B，
进入BIOS界面
****************************************************************************
*                                                                          *
*                  H3C S5110-52P BootWare, Version 1.11                    *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Jul 11 2014 17:08:02
CPU Type            : MIPS34kc
CPU L1 Cache        : 32KB
CPU Clock Speed     : 650MHz
Memory Type         : DDR3 SDRAM
Memory Size         : 128MB
Memory Speed        : 200MHz
BootWare Size       : 3MB
Flash Size          : 32MB


BootWare Validating...
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
在这个视图下选择6进入重启不运行当前文件，

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Restore to Factory Default Configuration                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): "6"
然后按"0"对交换机进行重启
重启后：
<H3C>sys  “进入系统视图”
[H3C]undo ip http enable   “关闭远程访问”
[H3C]ip http enable   “开启远程访问”
[H3C]local-user admin   “进入ADMIN用户对admin进行配置”
[H3C-luser-admin]password simple qitian20190305 “对admin这个用户设置密码”
[H3C-luser-admin]authorization-attribute level 3 “给ADMIN用户的权限提升到最高”
[H3C-luser-admin]service-type web ‘让ADMIN这个用户可以进行登录WEB’
[H3C-luser-admin]quit  "退出"
[H3C]vlan 10   “创建VLAN10”
[H3C-vlan10]quit   “退出”
[H3C]interface Vlan-interface 10    “进入vlan10进行配置“
[H3C-Vlan-interface10]ip address 192.168.1.1 24  ”给VLAN10添加IP“
[H3C-Vlan-interface10]quit  ”退出“
[H3C-GigabitEthernet1/0/48]port access vlan 10 ‘把48端口添加到VLAN10里面’
<H3C>save ‘保存退出’//切记切记