H3C交换机，路由器配置web界面
H3C交换机配置WEB界面
把交换机恢复出厂设置：
在交换机启动的过程出现提示按CTRL+B的时候按下CTRL+B，
进入BIOS界面
****************************************************************************
* *
* H3C S5110-52P BootWare, Version 1.11
*
* *
****************************************************************************
Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Jul 11 2014 17:08:02
CPU Type : MIPS34kc
CPU L1 Cache : 32KB
CPU Clock Speed : 650MHz
Memory Type : DDR3 SDRAM
Memory Size : 128MB
Memory Speed : 200MHz
BootWare Size : 3MB
Flash Size : 32MB
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
在这个视图下选择6进入重启不运行当前文件，
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): "6"
然后按"0"对交换机进行重启
重启后：
<H3C>sys “进入系统视图”
[H3C]undo ip http enable “关闭远程访问”
[H3C]ip http enable “开启远程访问”
[H3C]local-user admin “进入ADMIN用户对admin进行配置”
[H3C-luser-admin]password simple qitian20190305 “对admin这个用户设置密码”
[H3C-luser-admin]authorization-attribute level 3 “给ADMIN用户的权限提升到最高”
[H3C-luser-admin]service-type web ‘让ADMIN这个用户可以进行登录WEB’
[H3C-luser-admin]quit "退出"
[H3C]vlan 10 “创建VLAN10”
[H3C-vlan10]quit “退出”
[H3C]interface Vlan-interface 10 “进入vlan10进行配置“
[H3C-Vlan-interface10]ip address 192.168.1.1 24 ”给VLAN10添加IP“
[H3C-Vlan-interface10]quit ”退出“
[H3C-GigabitEthernet1/0/48]port access vlan 10 ‘把48端口添加到VLAN10里面’
<H3C>save ‘保存退出’//切记切记
